# Headphone Cables/Builds w/ Pictures - DIY

**URL:** <https://forum.headphones.com/t/headphone-cables-builds-w-pictures-diy/1586>\
**Category:** DIY Audio & Modifications\
**Tags:** diy, mods, cables\
**Created:** [May 28, 2018, 8:51pm UTC](https://forum.headphones.com/t/headphone-cables-builds-w-pictures-diy/1586 "2018-05-28T20:51:48Z")\
**Posts on this page:** 1\
**Showing post:** 281

<div class="post-metadata">

**Author:** ![generic](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.headphones.com/generic/32/61169_2.png) [@generic](https://forum.headphones.com/u/generic)\
**Post date:** [March 11, 2022, 4:02pm UTC](https://forum.headphones.com/t/headphone-cables-builds-w-pictures-diy/1586/281 "2022-03-11T16:02:34Z")

</div>

**Project: Convert the Koss PortaPro cable to the Hart Audio Cables modular system**

I bought a [mini XLR connector](https://www.adorama.com/ctta4flk.html) from Adorama, cut off the 3.5mm jack, and soldered the wires.

 ![PortaPro Hart Mod](https://us1.discourse-cdn.com/flex016/uploads/headphones/original/3X/5/0/50bc59142aecdcae455b028484c418cd2ed85115.jpeg)

Notes:

- My soldering skills are poor…don’t look inside. The 8th try was the charm.
- Mini XLR-4 connectors are mini. They require a sharp eye and a steady hand. I have neither.
- The PortaPro has incredibly thin wires. I didn’t try to remove the factory insulation, and just melted through with the solder.

Sources for wiring pinouts and testing:

- [Koss PortaPro](https://www.nordholmen.net/koss-porta-pro-soldering.html)
- [Hart Audio Cables](https://hartaudiocables.com/products/ic-3-4-pin-xlr)
- [Left-Right Channel Check (I still got it backward the first time)](https://www.audiocheck.net/audiotests_stereo.php)

I can now run the PortaPro with balanced amps. I’ll provide audio comments in the PortaPro thread after testing, at least as long as my soldering job holds up.

---

_[View the full topic](https://forum.headphones.com/t/headphone-cables-builds-w-pictures-diy/1586)._
